User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 96
Repeat the above steps to set up arming schedule for other days of the week. You can also use the Copy 5.
button to copy an arming schedule to other days.
Click OK to complete the video tampering settings of the alarm output no. 6.
You can also copy the above settings to another channel. 7.
Copy Settings of Alarm Output Figure 8-22
Triggering or Clearing Alarm Output Manually 8.9
Purpose:
A sensor alarm can be triggered or cleared manually. If “Manually Clear” is selected in the dwell time
drop-down list of an alarm output, the alarm can be cleared only by clicking the Clear button in the following
interface.
Select the alarm output you want to trigger or clear
and perform related operations. 1.
Go to Menu > Manual > Alarm. 2.
Click Trigger/Clear to trigger or clear an alarm output. 3.
Click Trigger All to trigger all alarm outputs. 4.
Click Clear All to clear all alarm outputs. 5.
Clear or Trigger Alarm Output Manually Figure 8-23