User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 84
Setting Sensor Alarms 8.2
Setting sensor alarms are possible only if using cameras with alarm inputs/outputs.
Purpose:
Set the handling action of an external sensor alarm.
Go to M
enu > Configuration > Alarm. 1.
Select the Alarm Input tab to enter the Alarm Input Settings interface. 2.
Alarm Status Interface of System Configuration Figure 8-4
Set up the handling action of the selected alarm input. 3.
1) Check Enable and click Setting to set up its alarm response actions.
Alarm Input Setup Interface Figure 8-5
(Optional) Enable the one-key disarming for local alarm input 1 (Local <- 1). 4.
1) Check Enable One-Key Disarming.
2) Click Settings to enter the linkage action settings interface.