User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 83
Set Trigger Camera of Motion Detection Figure 8-2
Set up the channel’s arming schedule. 4.
• Select the Arming Schedule tab to set the handling actions arming schedule for the motion detection.
• Choose a day of the week (up to eight time periods can be set within each day).
• Click Apply to save the settings
Time periods cannot repeat or overlap.
Set Arming Schedule of Motion Detection Figure 8-3
Click Handling to set up alarm response actions of motion alarm (refer to Chapter 8.8 Setting Alarm 5.
Response Actions).
To set motion detection for another channel, repeat the above steps or click Copy in the Motion Detection 6.
interface to copy the settings to it.