User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 68
For configuring the VCA recording, refer to Chapter 5.5 Configuring VCA Event Recording and
Capture; for VCA detection type details, refer to Chapter 9 VCA Alarm.
Select the camera(s) to search, and set the Start time and End time. 5.
Click Search to get the search result information. Refer to the right-side bar for the results. 6.
Select a result item and click to play back the file. 7.
Pre-play and post-play can be configured.
Enter the Synch Playback interface to select the camera(s) for synchronous playback. 8.
Synch Playback Interface Figure 6-9
Enter the playback interface. Use the toolbar on the bottom of the playback interface to control playing. 9.
Interface of Playback by Event Figure 6-10
Click or to select the previous or next event. Refer to Table 6.1 for the description of buttons on 10.
the toolbar.