User Manual

ERT-F2xx DVR User Manual

UM ERT-F2xx 030118NA 50

• In the message box, choose the day for which you want to set schedule.

Recording Schedule Interface

Figure 5-6

• Click the icon to set the accurate time of the schedule.

• To schedule an all-day recording, check the All Day checkbox.

Edit Schedule

Figure 5-7

• To arrange other schedule(s), leave the All Day checkbox blank and set the Start/End time.

Up to eight periods can be configured for each day. Time periods cannot overlap.

Select the record type in the drop-down list.

To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video

Content Analysis) triggered recording and capture, you must configure the motion detection

settings, alarm input settings or VCA settings as well. For detailed information, r

efer to Chapter 8.1 ,

Chapter 8.2 and Chapter 5.5 .

VCA settings are available only to smart IP cameras.