User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 31
ONVIF Checkbox Figure 2-32
Chapter 3 Live View
Live View displays the video image getting from each camera in real time.
Live View Status Icons 3.1
In live view mode, there are status icons at the upper-right of the screen for each channel, showing the status
of the record and alarm in the channel, so that you can know whether the channel is recorded, or whether
there are alarms occur as soon as possible.
Description of Live View Icons Table 3-1
Icons
Description
Alarm (video loss, video tampering, motion detection, sensor alarm, or VCA alarm)
Record (manual record, continuous record, motion detection, sensor alarm, or
VCA alarm triggered record)
Alarm & Record
Event/Exception (motion detection, sensor alarm, VCA alarm, or exception
information appears at the lower-left corner of the screen. Refer to Chapter 8.8
Setting Alarm Response Actions for details.)
Operations in Live View Mode 3.2
Right-Click Menu 3.2.1
In live view mode, there are many functions provided. The functions are listed below.
When the aux output is enabled, the main output cannot perform any operation, and you can do some basic
operation on the live view mode for the Aux output.