User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 23
Before adding a camera, make sure the IP camera to be added is in active status. If the camera is in
inactive status, click the inactive icon of the camera to set the password to activate it. You can also
select multiple cameras from the list and click One-touch Activate to activate the cameras in batch.
Click Exit to complete the Setup Wizard. 3.
Adding and Enabling Analog Cameras 2.3
Connect analog camera(s) to the “Video In” BNC connectors. Analog cameras are enabled by default; no
further action is required.
Adding and Connecting IP Cameras 2.4
Activating IP Cameras 2.4.1
Purpose:
Before adding the camera, make sure the IP camera to be added is in active status.
Select Add IP Camera from the right-click menu in live view mode or Go to Menu > Camera > Camera to 1.
enter the IP camera management interface.
For detected online IP cameras in the same network segment, the Password status shows whether
it is active or inactive.
IP Camera Management Interface Figure 2-19
Click the inactive icon of the camera to enter the following interface to activate it. You can also select 2.
multiple cameras from the list and click One-touch Activate to activate the cameras in batch.