User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 16
Using the Unlock Pattern for Login 2.1.3
Configure the unlock pattern for device login.
Configuring the Unlock Pattern
After the device is activated, configure the device unlock pattern.
Set Unlock Pattern Figure 2-7
Use the mouse to draw a pattern among the nine dots on the screen. Release the mouse when done. 1.
Draw the Pattern Figure 2-8
Connect at least four dots to draw the pattern.
Each dot can be connected only once.
Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured 2.
successfully.