User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 110
Network Traffic Interface Figure 9-20
You can view the sending rate and receiving rate information on the interface. The traffic data is refreshed 2.
every one second.
Configuring Network Detection 9.3
Purpose:
You can obtain the DVR’s network connecting status through the network detection function, including
network delay, packet loss, etc.
Testing Network Delay and Packet Loss
9.3.1
Go to Menu > Maintenance > Net Detect. 1.
Click the Network Detection tab to enter the Network Detection menu, as shown in Figure 9-21. 2.
Network Detection Interface Figure 9-21
Enter the destination address in the Destination Address text field. 3.
Click Test to start testing network delay and packet loss. The testing result pops up on the window. If the 4.
testing fails, the error message box will pop up as well.