User Manual

ERT-F2xx DVR User Manual
UM ERT-F2xx 030118NA 107
Check checkbox to enable UPnP™. 3.
Select the Mapping Type as Manual or Auto in the drop-down list. 4.
• OPTION 1: Auto
If you select Auto, the Port Mapping items are read-only, and the external ports are set by the
router automatically.
1. Select A
uto in the Mapping Type drop-down list.
2. Click Apply to save the settings.
3. You can click Refresh to get the latest port mapping status.
UPnP™ Settings Finished-Auto Figure 9-15
• OPTION 2: Manual
If you select Manual as the mapping type, you can edit the external port on your demand by
clicking to activate the External Port Settings dialog box.
1. Select M
anual in the Mapping Type drop-down list.
2. Click to activate the External Port Settings dialog box. Configure the external port no. for
server port, http port, RTSP port, and https port respectively.
You can use the default port no., or change it according to actual requirements.
External Port indicates the port no. for port mapping in the router.
The value of the RTSP port no. should be 554 or between 1024 and 65535, while the value of the
other ports should be between 1 and 65535 and the value must be different from each other. If
multiple devices are configured for the UPnP™ settings under the same router, the value of the port
no. for each device should be unique.