EPI-4225I-DE-Quick-start-Guide

QSG EPI-4225I-DE 030518NA 20
Figure 4-2 Download Plug-in
6. Re-open the Web browser after the installation of the plug-in and repeat the above
step 2 to step 4 to log in.
Note:
For configuration instructions, refer to the network speed dome user manual.
5 Hik-Connect
Purpose:
Hik-Connect is a mobile application to view live camera images, receive alarm
notifications, etc.
5.1 Enable Hik-Connect for Use with Cameras
Purpose:
Enable Hik-Connect should on your camera before using the service.
You can enable the service either via SADP software or a Web browser.
5.2 Enable Hik-Connect Service via SADP Software
Steps:
1. Check the Enable Hik-Connect checkbox:
1). For the “Activate the Device” page that appears during camera activation, refer
to Chapter 3.2.2.
2). For the “Modify Network Parameters” page that appears while modifying the IP
address, refer to Chapter 3.3.
2. Create or change the verification code.