EPI-4225I-DE-Quick-start-Guide

QSG EPI-4225I-DE 030518NA 17
STRONG PASSWORD RECOMMENDED – We highly recommend that you
create a strong password of your own choosing (using a minimum of eight
characters, including at least three of the following categories: upper case
letters, lower case letters, numbers, and special characters) in order to increase
the security of your product. We also recommend that you reset your password
regularly. Especially in a high security system, resetting the password monthly
or weekly can better protect your product.
Note:
You can enable the Hik-Connect service for the device during activation. Refer to
Section 1 Error! Reference source not found..
4. Click Activate to save the password.
Note:
You can check whether the activation is completed on the pop-up window. If
activation failed, make sure that the password meets the requirements, and try
again.
3.3 Modifying the IP Address
Purpose:
To view and configure the speed dome via the LAN (Local Area Network), connect the
network speed dome to the same subnet as your PC.
Use the SADP software or client software to search and change the IP address of the
device. We consider SADP IP address modification as an example for introducing IP
address modification.
Note:
For IP address modification via client software, refer to the client software user manual.
Steps:
1. Run SADP.
2. Select an active device.
3. Change the device IP address to the same subnet as your computer by either
modifying the IP address manually or checking the Enable DHCP box.