EPI-4225I-DE-Quick-start-Guide

QSG EPI-4225I-DE 030518NA 16
3. Create and input a password.
STRONG PASSWORD RECOMMENDED – We highly recommend that you
create a strong password of your own choosing (using a minimum of eight
characters, including at least three of the following categories: upper case
letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset
your password regularly. Especially in a high security system, resetting the
password monthly or weekly can better protect your product.
4. Confirm the password.
5. Click OK to activate the speed dome and enter the live view interface.
3.2.2 Activation via SADP
SADP software is used for detecting the online device, activating the device, and
resetting the password.
Get the SADP software from the supplied disk or the official Web site, and install the
SADP according to the prompts.
Follow the steps to activate the speed dome.
Steps:
1. Run the SADP software to search for online devices.
2. Check the device status from the device list, and select an inactive device.
Select inactive device.
Input and confirm
password.
Figure 3-4 SADP Interface
Note:
The SADP software supports activating the speed dome in batch. Refer to the SADP
user manual for details.
3. Create, input, and confirm the password.