Quick Start Guide

ECT-B32V2 Quick Start Guide
QSG ECT-B32V2 031518NA 7
 Check the specification of the products for the installation
environment.
 Check whether the power supply is matched with your power
output to avoid the damage.
 Make sure the wall is strong enough to withstand three times
the weight of the camera and the bracket.
 If the wall is cement, insert expansion bolts before installing the
camera. If the wall is wooden, use self-tapping screws to secure
the camera.
 If the product does not function properly, contact your dealer
or the nearest service center. Do NOT disassemble the camera
for repair or maintenance by yourself.
2.1 Installation of Camera
Before You Start:
Both wall mounting and ceiling mounting are suitable for the
bullet camera. Ceiling mounting will be taken as an example in this
section. You can take the ceiling mounting steps as a reference for
wall mounting.
Steps:
1. Paste the drill template (supplied) to the place where you want
to install the camera.
2. Drill the screw holes and the cable hole (optional) in the ceiling
according to the drill template.