Quick Start Guide

ECT-B32V2 Quick Start Guide

QSG ECT-B32V2 031518NA 4

• Do not aim the camera at the sun or extra bright places.

• The sensor may be burned out by a laser beam, so when any laser equipment is in using, make

sure that the surface of sensor will not be exposed to the laser beam.

• Do not expose the device to high electromagnetic radiation or extremely hot, cold, dusty or

damp environment.

• To avoid heat accumulation, good ventilation is required for the operating environment.

• Keep the camera away from liquid while in use for non-water-proof device.

• While in delivery, the camera shall be packed in its original packing, or packing of the same

texture.

Mark Description

DC Voltage