Quick Start Guide

ECT-B12Fx Quick Start Guide
QSG ECT-B12Fx 031518NA 9
Figure 2-2 Fix the Camera to the Ceiling
Note:
 The supplied screw package contains self-tapping screws and
expansion bolts.
 For a cement ceiling, expansion bolts are required to fix the
camera. For a wooden ceiling, self-tapping screws are
required.
4. Route the cables through the cable hole or the side opening.
5. Connect the corresponding power cord and video cable.
6. Power on the camera to check if the image on the monitor is
gotten at an optimum angle. If not, adjust the camera according
to the figure below to get an optimum angle.
Figure 2-3 3-axis Adjustment