ECI-T22F2-Quick-start-Guide

Access via Web Browser

System Requirement:

Operating System: Microsoft Windows XP SP1 and above

CPU: 2.0 GHz or greater

RAM: 1 Gb or greater

Display: 1024×768 resolution or higher

Web Browser: Internet Explorer 8.0 or higher, Apple Safari 5.0.2 or higher, Mozilla Firefox 5.0

or higher, and Google Chrome 18 or higher

Steps:

1. Open the Web browser.

2. In the browser address bar, input the IP address of the network camera, and press the

Enter key to enter the login interface.

Note:

The default IP address is 192.168.1.64. It is suggested that you change the IP address to the

same subnet as your computer.

3. Input the user name and password.

The admin user should configure the device accounts and user/operator permissions

properly. Delete the unnecessary accounts and user/operator permissions.

Note:

The device IP address gets locked if the admin user performs 7 failed password attempts (5

attempts for the user/operator).

4. Click Login.

Figure 4-1

5. Install the plug-in before viewing the live video and managing the camera. Follow the

installation prompts to install the plug-in.

Note:

You may have to close the web browser to complete plug-in installation.

Download Plug-in

Figure 4-2

6. Reopen the web browser after plug-in installation and repeat steps 2 to 4 in order to login.

Note:

For further configuration instructions, please refer to the network camera user manual.