Quick Start Guide

ECI-D64Z2 Network Dome Camera Quick Start Guide
QSG VE ECI-D64Z2 041118NA 6
1 Appearance
This camera series consists of several different models. Some models are equipped with a
zoom lens, in which focus levels must be manually adjusted via a zoom/focus lever. Other
models have a motor-driven lens, which allow for zoom and focus adjustment to be
completed via web browser or client software. Please refer to the actual device.
Camera Overview 1.1
1.1.1 Overview
Camera overview is shown below.
DC12VIN
5
6
1
7
2
3
4
Figure 1-1 Camera Overview
Table 1-1 Camera Overview
No
.
Description
1 Black Liner
2 Bubble
3 Reset Button
4 Memory Card Slot
5 Power Cord
6 Network Cable (PoE)
7 Lens
Notes:
Press RESET for 10s when the camera is powering up or rebooting, in order to restore the
default settings, which include the user name, password, IP address, port number, etc.
2 Installation
Make sure of the following before starting:
● The device included in the package is in good condition and all required parts are
included.
● The standard power supply is 12 VDC or PoE (802.3af), and must be consistent with
camera requirements.
● Equipment is powered off during installation.
● The installation environment is correct.