Quick Start Guide

ECI-D64Z2 Network Dome Camera Quick Start Guide
QSG VE ECI-D64Z2 041118NA 4
• The sensor may be burned out by a laser beam, so when any laser equipment is in using,
make sure that the surface of sensor will not be exposed to the laser beam.
• Do not place the camera in extremely hot, cold (the operating temperature shall be -30°
to +60° C, or -40° to +60° C if the camera model has an “H” in its suffix), dusty or damp
locations, and do not expose it to high electromagnetic radiation.
• To avoid heat accumulation, good ventilation is required for the operating environment.
• Keep the camera away from liquid while in use.
• While in delivery, the camera shall be packed in its original packing or packing of the
same texture.
• Regular part replacement: a few parts (e.g., electrolytic capacitor) of the equipment shall
be replaced regularly according to their average enduring time. The average time varies
because of differences between operating environment and using history, so regular
checking is recommended for all the users. Please contact with your dealer for more
details.
• Improper use or replacement of the battery may result in hazard of explosion. Replace
with the same or equivalent type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.
• If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)