Quick Start Guide

ECI-D64Z2 Network Dome Camera Quick Start Guide
QSG VE ECI-D64Z2 041118NA 14
STRONG PASSWORD RECOMMENDED – We highly recommend creating a strong
password of your own choosing (using a minimum of eight characters, including
upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We recommend regularly resetting your
password on a weekly or monthly basis, especially in high security systems.
4. Confirm the password.
5. Click OK to save the password and enter the live view interface.
3.2.2 Activation via SADP Software
SADP software is used for detecting online devices, activating cameras, and resetting
passwords.
SADP can be obtained from the supplied disk or the official website, and installed by
following the prompts.
Follow the steps to activate the camera.
Steps:
1. Run SADP to search for online devices.
2. Check the device status from the device list, and select the inactive device.
Select inactive device.
Input and confirm
password.
SADP Interface Figure 3-4
Note:
SADP supports batch camera activations. Refer to the SADP user manual for further details.
3. Create, input, and confirm the password.
STRONG PASSWORD RECOMMENDED – We highly recommend creating a strong
password of your own choosing (using a minimum of eight characters, including
upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We recommend regularly resetting your
password on a weekly or monthly basis, especially in high security systems.
Note:
You can enable the Hik-Connect service for the device during activation. Refer to Chapter
5.1 for detailed information.