Quick Start Guide

ECI-D64Z2 Network Dome Camera Quick Start Guide
QSG VE ECI-D64Z2 041118NA 13
N
e
t
w
o
r
k
C
a
b
l
e
N
e
t
w
o
r
k
C
a
b
l
e
or
or
Network Camera Computer
Connect via a Switch or a Router Figure 3-2
Activate the Camera 3.2
Activate the camera by setting a strong password. Activation via web browser, activation via
SADP, and activation via client software are supported. Activation via SADP software and
web browser will be used as examples to introduce camera activation.
Note:
Refer to the Network Camera User Manual for activation via client software.
3.2.1 Activation via Web Browser
Steps:
1. Power the camera on. Connect the camera to your computer or the switch/router that
your computer connects to.
2. Input the IP address into the address bar of the web browser, and press Enter to enter
the activation interface.
Notes:
 The camera’s default IP address is 192.168.1.64.
 The computer and the camera should belong to the same subnet.
 For cameras that have DHCP enabled by default, use the SADP software to search for the
IP address.
Activation Interface (Web) Figure 3-3
3. Create and input a password.