Quick Start Guide

ECI-D64Z2 Network Dome Camera Quick Start Guide

QSG VE ECI-D64Z2 041118NA 12

2. Loosen the zoom lever and move the lever between T (Tele) and W (Wide) to obtain the

ideal viewing angle.

Zoom/Focus Lever

Zoom/Focus Lever (Type II Camera)

Figure 2-12

3. Tighten the zoom lever.

4. Loosen the focus lever and move the lever between F (Far) and N (Near) to obtain the

optimum focus.

5. Tighten the focus lever.

Motor-Driven Lens:

Some camera models in this series are equipped with a motor-driven lens. Adjust the zoom

and focus level in the PTZ control panel found in the Web browser or client software.

Web Browser Zoom and Focus Adjustment

3 Camera LAN Configuration

Note:

The use of products with internet access carries inherent security risks. In order to avoid

network attacks and information leakage, strengthen your own network protection.

If the product does not work properly, contact your dealer or the nearest service center for

help.

Wiring

3.1

Connect the camera to network as follows:

Network Cable

Network Camera

Computer

Connect Directly

Figure 3-1