Quick Start Guide

ECI-D64Z2 Network Dome Camera Quick Start Guide
QSG VE ECI-D64Z2 041118NA 11
Auxiliary Video
Cable
Auxiliary Video
Output
To a monitor
Connect Camera to a Monitor Figure 2-9
Note:
For certain camera models, the auxiliary video cable is not included in the package. Instead,
you can connect the video out interface of the camera to a monitor for image and focus
adjustment.
Video Out
Interface
Camera Video-Out Interface Figure 2-10
2.3.1 3-Axis Adjustment
Steps:
1. View camera output on the monitor.
2. Loosen the tilt adjusting screw to adjust the tilt angle [0° to 70°], hold the black liner to
adjust the pan angle [0° to 355°], and hold the lens to rotate the camera [0° to 355°].
Tilt: 0° to 70°
Pan: 0° to 355°
Rotate: 0° to 355°
3-Axis Adjustment Figure 2-11
2.3.2 Zoom and Focus Adjustment
Manual Adjustment:
Some camera models in this series have a zoom lens. Focus levels must be manually
adjusted via the zoom/focus lever. Use the zoom and focus levers to adjust the lens.
Steps:
1. View camera output on the monitor.