Quick Start Guide

QSG ECI-B62Z2 030618NA 5
5. Loosen the focus lever, and move the lever between F (Far) and N (Near) to obtain the
optimum focus.
6. Tighten the focus lever.
7. Install the sun shield and the front cover back onto the camera.
D
C 1 2
V I N
Zoom/Focus Lever
Zoom and Focus Adjustment Figure 2-8
Note:
If the camera is equipped with a fixed lens, you don’t need to adjust the zoom and focus.
Type II 2.3.2
Cameras of this type are equipped with a motorized varifocal lens. You can adjust the zoom
and focus level on the PTZ control panel by visiting the camera via a Web browser or client
software.
For detailed steps, refer to the network camera user manual.
Zoom and Focus Adjustment via Web Browser Figure 2-9
2.4 Installation of Network Cable Water-Resistant Jacket (Optional)
Purpose:
If the camera is installed outdoors, you can connect a water-resistant accessory to the
network cable to protect it from water accumulation.
① ② ③ ④
⑤
⑥ ⑦
Figure 2-10 Waterproof Accessory Components
Table 2-1 Components
No. Components
1 Network Interface Socket