Quick Start Guide

ECI-B14Fx Network Bullet Camera Quick Start Guide
QSG VE ECI-B14Fx 060118NA 7
1 Appearance Description
This network bullet camera appearance is shown as the figures below.
D
C
1
2
V
I
N
5
6
1
2
4
3
Network Bullet Camera Overview
No.
Description
1
Lens
2
Front Cover
3
Back Cover
4
Fix Ring
5
Power Cord
6
Network Cable
NOTE:
For power over Ethernet (PoE), the power is passed along with data on
Ethernet cabling. A switch that supports the PoE function is required.
2 Installation
Before You Start:
 Make sure the device in the package is in good condition and all the
assembly parts are included.
 The standard power supply is 12 VDC, make sure your power supply
matches your camera.
 Make sure all related equipment is powered off during the installation.
 Check the product specification for the installation environment.
 Make sure that the wall is strong enough to withstand four times the
weight of the camera and the bracket.
 Make sure that there are no reflective surfaces too close to the camera
lens. The IR light from the camera may reflect back into the lens causing
reflection.