Quick Start Guide

ECI-B14Fx Network Bullet Camera Quick Start Guide
QSG VE ECI-B14Fx 060118NA 4
Safety Instruction
These instructions are intended to ensure that user can use the product
correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”.
Warnings: Serious injury or death may occur if any of the warnings are
neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are
neglected.
Warnings
 In the use of the device, you must be in strict compliance with the
electrical safety regulations of the nation and region.
 Input voltage should meet both the SELV (Safety Extra Low Voltage) and
the Limited Power Source with 12 VDC according to the IEC60950-1
standard. Refer to technical specifications for detailed information.
 The output current of the power adapter must be no more than 6A.
 Do not connect multiple devices to one power adapter to avoid
over-heating or a fire hazard caused by overload.
 Make sure that the plug is firmly connected to the power socket.
 Make sure that the device is firmly fixed if wall mounting or ceiling
mounting is adopted.
 If smoke, odor or noise rise from the device, turn off the power at once
and unplug the power cord, and then contact the service center.
 Never attempt to disassemble the camera by unprofessional personal.
Warnings
Follow these
safeguards to
prevent
serious injury
or death.
Cautions Follow
these
precautions to
prevent
potential injury
or material
damage.