Quick Start Guide

ECI-B14Fx Network Bullet Camera Quick Start Guide
QSG VE ECI-B14Fx 060118NA 21
Connect a Router
NOTE:
After the camera connects to the network, wait one minute before using the
camera with Hik-Connect.
2. Add the camera to the Hik-Connect app:
• If Accessing the Camera through an NVR: Tap “+” on the upper-right
corner and scan the QR code that appears in the NVR interface.
• If Accessing the Camera through a Web Browser: Tap the icon
and type in the camera’s serial number.
3. Input your camera’s verification code.
NOTE:
The required verification code is created or changed when you enable
Hik-Connect on your camera.
Forgotten verification codes can be recovered in the Platform Access
configuration page via the Web browser.
4. Follow the prompts to set up the network connection and add the
camera to your Hik-Connect account.
NOTE:
For detailed information, refer to the Hik-Connect user manual.