Quick Start Guide

ECI-B14Fx Network Bullet Camera Quick Start Guide
QSG VE ECI-B14Fx 060118NA 20
Platform Access Configuration (Web)
3. Set the Platform Access Mode to Hik-Connect.
4. Check the Enable checkbox.
5. Click and read the “Terms of Service” and “Privacy Policy” in the pop-up
window.
6. Create or change the verification code for the camera.
NOTE:
A verification code is required when adding the camera to Hik-Connect.
7. Save the settings.
3.5.6 Add Camera to Hik-Connect
Before You Start
Enable Hik-Connect on the camera before adding it to your Hik-Connect
account. Refer to Chapter 5.1.
1. Use a network cable to connect the camera to a router if the camera
does not support Wi-Fi.