Quick Start Guide

ECI-B14Fx Network Bullet Camera Quick Start Guide
QSG VE ECI-B14Fx 060118NA 16
5. You can enable the Hik-Connect service for the device during activation.
Refer to Chapter 5.1 for detailed information.
6. Click Activate to start activation.
7. You can check whether the activation is complete on the pop-up window.
If activation fails, make sure that the password meets the requirement
and try again.
3.3 Modify the IP Address
To view and configure the camera via LAN (Local Area Network), you need to
connect the network camera in the same subnet with your PC.
Use the SADP software or client software to search and change the IP
address of the device. We take modifying the IP address via SADP software
as an example to introduce IP address modification.
For IP address modification via client software, refer to the client software
user manual.
1. Run the SADP software.
2. Select an active device.
3. Change the device IP address to the same subnet as your computer by
either modifying the IP address manually or checking the Enable DHCP
checkbox.
Modify the IP Address