Quick Start Guide
Network PTZ Camera·Quick Start Guide
33
Figure 2-48 Fix the Base Plate
5. Connect the cables and route the cable through the cable outlet.
Align the PTZ camera with the base plate. Rotate the PTZ camera
clockwise into the base plate, and the PTZ camera is secured with
the base plate by three locks on the plate.
Note:
Water-proof treatment is required for cable connectors. Refer to
section 2.9 and 2.10 for details.
6. Fix the screws on the side with a screwdriver, as shown in Figure
2-49.
①
OPEN LOCK
②
③