Quick Start Guide
Network PTZ CameraยทQuick Start Guide
26
3. Drill a cable hole in the ceiling according to the circle A on the
template if you want to route the cables through the ceiling. Pull
out the cable slot cover if you want to route the cables on the
surface of the ceiling, as shown in Figure 2-37.
Cable Slot Cover
Figure 2-37 For DE2xxx Series PTZ Camera
Cable Slot Cover
Figure 2-38 For DE2xxxI Series (IR) PTZ Camera
4. Attach the base plate to the ceiling and secure it with the supplied
three self-tapping screws by aligning with three screw holes in the
ceiling, and the front arrows on the drill template and base plate
should be aligned together as well, as shown in Figure 2-39 and
Figure 2-40.