Quick Start Guide
Network PTZ CameraยทQuick Start Guide
25
Figure 2-35 Cabling for DE2xxxI Series (IR) PTZ Camera
Note:
Water-proof treatment is required for cable connectors. Refer to
section 2.9 and 2.10 for details.
Ceiling Mounting without Junction Box
Steps:
1. Rotate the base plate counterclockwise to separate it from the PTZ
camera, as shown in Figure 2-26 and Figure 2-27.
2. Attach the drill template (supplied) to the place where you want
to fix the PTZ camera, and make sure the front arrow appoints to
the monitoring area.
Figure 2-36 Attach the Drill Template