Quick Start Guide

Network PTZ Camera·Quick Start Guide
16
4. Route the cables from the cable hole in the installation plate.
Note:
Water-proof treatment is required for cable connectors. Refer to
section 2.9 and 2.10 for details.
5. Align the camera with the installation plate, and rotate the camera
clockwise to fix it, as shown in Figure 2-20.
OPEN
LOCK
Figure 2-20 Fix the Camera
2.2.2 Wall Mounting
Notes:
 For cement wall, you need to use the expansion screw to fix the
bracket. The mounting hole of the expansion pipe on the wall
should align with the mounting hole on the bracket.
 For wooden wall, you can just use the self-tapping screw to fix
the bracket.
 Make sure that the wall is strong enough to withstand more
than eight times the weight of the PTZ camera and its
accessories.