User Manual

81
Bypass on Re-arm
While enabled, the zone with fault will be bypassed automatically when re-arming.
Polling Loss Times
Set the maximum duration for polling loss. The system will report fault if the duration is over
the limit.
Fault Check
The system determines whether to check the faults listed on the page. The system will only check
the fault that is selected.
Click System → System Options →Fault Check to enter the page.
Detect Network Camera Disconnection
If the option is enabled, when the linked network camera is disconnected, an alarm will be
triggered.
Battery Fault Check
If the option is enabled, when battery is disconnected or out of charge, the device will upload
events.
LAN Fault Check
If the option is enabled, when the wired network is disconnected or with other faults, the alarm
will be triggered.
Wi-Fi Fault Check
If the option is enabled, when the Wi-Fi is disconnected or with other faults, the alarm will be
triggered.
Cellular Network Fault Check
If the option is enabled, when the cellular data network is disconnected or with other faults, the