User Manual

80
Forced Auto Arm
If the option is enabled and there are active faults in a zone, the zone will be bypassed
automatically when arming.
Note
You should disable the arming function in the Advanced Settings page. Or the AX PRO arming
with fault function cannot be valid.
System Status report
If the option is enabled, the device will upload report automatically when the AX PRO status is
changed.
Voice Prompt
If the option is enabled, the AX PRO will enable the text voice prompt.
System Volume
The available system volume range is from 0 to 10.
Audible Tamper Alarm
While enabled, the system will alert with buzzer for the tamper alarm.
Panel Lockup Button
Enable/disable the lockup button for the control panel.