User Manual

79
Note
Only when all the detectors are without fault, you can enter the mode TEST mode.
2. Check the Test check box to start walk test.
3. Click Save to complete the settings.
4. Trigger the detector in each zone.
5. Check the test result.
Export File
You can export debugging file to the PC.
Steps
1. Click Maintenance → Export File to enter the page.
2. Check the check box to enable the function.
3. Click Export to save the debugging file in the PC.
4.3.7 System Settings
Authority Management
Set the authority options.
Click System → System Options → System Management to enter the System Option Management
page.