User Manual

edit the keyfob information or delete the keyfob from the AX PRO.

Steps

1. Click Device → Keyfob to enter the Keyfob Management page.

2. Click Add and press any key on the keyfob.

3. Set the keyfob parameters.

Name

Customize a name for the keyfob.

Permission Settings

Check different items to assign permissions.

Single Key Settings

Select from the drop-down list to set I key and II key's functions

Combination Keys Settings

Select from the drop-down list to set combination keys' functions.

4. Click OK.

5. Optional: Click to edit the keyfob information.

6. Optional: Delete a single keyfob or check multiple keyfobs and click Delete to delete the keyfobs

in batch.

Note

The communication of wireless devices like keyfob was identified by the SN number, which will

be encrypted during transmission. The SN number was leading with character Q to Z, and

following 8 digits, like Q02235774.Allowing for a maximum number of 100,000,000 (10 to the

power of 8 [digits]).

Add/Edit/Delete Tag

You can add tag to the AX PRO and you can use the Tag to arm/disarm the zone. You can also edit

the tag information or delete the tag from the AX PRO.

Note

The communication of tag was identified by the SN number, which will be encrypted during

transmission. The SN number was leading with 32 digits, and there are at most 4,294,967,296 SN

numbers can be identified.

Steps

1. Click Device → Tag to enter the management page.

2. Click Add and place a Tag on the Tag area of the AX PRO.

3. Customize a name for the Tag in the pop-up window.