User Manual

3. Set the keypad name.

4. Check the check box to enable the function of buzzer, silent panic alarm, silent medical alarm,

and keypad button.

5. Check the check box to enable the function of arming without password.

6. Check the Enable check box of Back-light Off Time, and set the duration of light off.

7. Set the rolling rate.

8. Select the keypad linked area.

Note



Only enabled areas will be listed.



The newly added peripheral is linked to area 1 by default.

9. Set whether to cancel the enrollment of the keypad or not. If the link is enabled, the device will

be deleted.

10. Click OK.