User Manual

68
Note

Only enabled areas will be listed.

The newly added peripheral is linked to area 1 by default.
6. Select to enable Alarm LED Indicator, Alarm Buzzer, Arm/Disarm LED Indicator, and
Arm/Disarm Buzzer.
7. Set the Polling Rate and Alarm Duration.
8. Click OK.
Note
After the sounder is configured, you can click Status → Sounder to view the sounder status.
Keypad
You can set the parameters of the keypad that is enrolled to the AX PRO.
Steps
1. Click Device → Keypad to enter the page.
2. Click to enter the Keypad Settings page.