User Manual

64
3. Edit the zone name.
4. Check linked areas.
Note

Only enabled areas will be listed.

The newly added peripheral is linked to area 1 by default.
5. Select a zone type.
Instant Zone
This Zone type will immediately trigger an alarm event when armed.
Delay Zone
Exit Delay: Exit Delay provides you time to leave through the defense area without alarm.
Entry Delay: Entry Delay provides you time to enter the defense area to disarm the system
without alarm.
The system gives Entry/Exit delay time when it is armed or reentered. It is usually used in
entrance/exit route (e.g. front door/main entrance), which is a key route to arm/disarm via
operating keyboard for users.
Note

You can set 2 different time durations in System Options → Schedule & Timer.

Ensure that timer is no longer than 45 seconds in order to comply with EN50131-1.

You can set Stay Arm Delay Time for the delay zone.