User Manual

60
6. Select a communication mode from the drop-down list according to the actual device
communication method.
Auto
The system will select the communication mode automatically according to the sequence of,
wired network, Wi-Fi network, and cellular data network. Only when the current network is
disconnected, will the device connect to other network.
Wired Network & Wi-Fi Priority
The connection priority order from high to low is: wired network, Wi-Fi, cellular data
network.
Wired &Wi-Fi
The system will select wired network first. If no wired network detected, it will select Wi-Fi
network.
Cellular Data Network
The system will select cellular data network only.
7. Optional: Change the authentication password.
Note
● By default, the authentication password is displayed in the text box.
● The authentication password should contain 6 to 12 letters or digits. For security reasons, an
8-character password is suggested, which containing two or more of the following character
types: uppercases, lowercases, and digits.
8. Click Save.
Notification by Email
You can send the alarm video or event to the configured email.
Steps
1. Click Communication →Notification by Email to enter the page.
2. Click the block to enable the function of sending video verification event .
3. Enter the sender's information.
Note
It is recommended to use Gmail and Hotmail for sending mails.
4. Enter the receiver's information.
5. Click Receiver Address Test and make sure the address is correct.
6. Click Save.