User Manual

Note

The password (PIN code) is allowed to be 4 to 6 digits. No number is

disallowed, with 10,000 to 100,000 differs, and no limit of the digit

combination.

After you add one keypad, you can add PIN code (Keypad Password)

in the user menu. When you click in the input box, there will be

indication shows that 4 to 6 numbers allowed. This is the same for

each user

Edit Duress Password

If the target user is an administrator or an operator, you can tap the

target user on the user list and then tap Edit Duress Password to set

the duress password to the target user.

Note

If under duress, you can enter the duress code on the keyboard to

arm and disarm area(s) and upload a duress alarm.

Automation Control

An administrator, an installer or an operator can control the relay

module, wall switch and smart plug.

Note

● Configuration items and user permission will vary according to the user type.

● You can view linked Tags/tags and keyfobs of the user but you do not have permission to

configure them.

8. Optional: (Only for the administrator) Click + to add a user.

Bypass Zone

When the area is armed, you can bypass a particular zone as you desired.

Before You Start

Link a detector to the zone.

Steps

1. On the device list page, tap the AX PRO and then log in to the device (if required) to enter the

Area page.

2. Tap Device.

3. Tap a zone in the Device tab.

4. Tap to enter the Setting page.

5. Enable Bypass and the zone will be in the bypass status.