User Manual

33
Communication
Cellular Data Network
Enter a short description of your task here (optional).
Steps
1. In the site, tap the AX PRO and then log in to the device (if required).
2. Tap → Communication Parameters→ Cellular Data Network Settings to enter the page.
3. Enable Mobile Network.
4. Tap Parameter Configuration → Edit Icon and set parameters including the user name, access
password, APN, MTU and PIN conde.
5. Tap Save Icon.
6. Enable Data Usage Limit.
7. Edit Data Used This Month and Data Limited per Month.
Push Notifications
When an alarm is triggered, if you want to send the alarm notification to the mobile phone, you
can set the notification push parameters.
Steps
1. In the site, tap the AX PRO and then log in to the device (if required).
2. Tap → Communication Parameters→ Push Notification(s) to enter the page.
3. Tap Phone Call and SMS.
4. Tap + or + Add Phone Number to enter the phone number.
5. Tap the added phone number to enable Phone Call and SMS according to your need.
6. (For Phone Call) Set Numbers of Calling.
7. (For SMS) Set Arming Permission, Disarming Permission and Alarm Clearing Permission for
areas.
8. Check notifications.
Zone Alarm/Lid Notification
The device will push notifications when the zone alarm is triggered or the zone lid opened is
triggered or restored.
Note
You need to set event filtering interval time for phone calling.
Peripherals Lid Opened
The device will push notifications when lid opened of any peripherals is triggered or restored.
Panel Lid Opened
The device will push notifications when lid opened of the control panel is triggered or
restored.
Panic Alarm