User Manual

AX Pro wireless control panel is compatible with SIA IP Reporting (UDP/TCP-2013) as per

ANSI/SIA DC-09-2013: Internet Protocol Event Reporting. The control panel supports

tokens (protocols) of ADM-CID and SIA-DCS defined in SIA DC-07-2001.04, which will be

modified to insert a “*” before token name as *ADM-CID and *SIA-DCS when the data

and timestamp of transmission message are AES encrypted. AES-128, AES-192 and AES-

256 are all supported.

As per EN 50131-1:2006+A1:2009+A2:2017, 9.1 Types of power supply

Nominal value. Actual capacity may vary slightly. The actual battery capacity for each

individual device may be slightly above or below the nominal battery capacity.

Removing the battery may cause damage to the device. To replace or repair the battery,

please contact your installer.

In the condition of Wi-Fi connected, GPRS/3G/4G LTE connected, ARC connected

(polling interval: 1800 s), 8 inputs and 1 keypad accessed, and cloud service accessed.

Note

ISUP5.0: a privacy internet protocol that is used for accessing the third-party platform, which

supports alarm report uploading, AX PRO management, and short video uploading.

The prioritization of the message and indications are the same. The AXPRO uploads messages and

gives indications synchronously.

Note

Standard DC-09 Protocol:

ADM-CID: The data presenting method of DC-09 is CID, which is not encrypted and only for

uploading alarm report.

*ADC-CID: The data presenting method of DC-09 is CID, which is encrypted and only for

uploading alarm report.

SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is not

encrypted and only for uploading alarm report.

*SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is

encrypted and only for uploading alarm report.