User Manual

Command
5
8
The keypad command is shown as follows.
Events Codes Notes
Away arming for all areas:
User password + Away
Away arming for specified area:
User password + # + Area
No.(1,2.3.4.5.6.7.8.9.010.011.012....)
+ away
-The keypad does not display area No. greater than 9.
-If the area No. is greater than 9, enter " 0XX"for the No.."0"indicates
tens digits, and "XX"indicates the actual area No.
-If the selected area is not related to the keypad,the back light of “0” will
Stay arming for all areas:
User password + Stay
Stay arming for specified area:
User password + # + Area
No.(1,2.3.4.5.6.7.8.9.010.011.012....)
+ Stay
-The keypad does not display area No. greater than 9.
-If the area No. is greater than 9, enter " 0XX"for the No.."0"indicates
tens digits, and "XX"indicates the actual area No.
-If the selected area is not related to the keypad, the back light of “0” will
flashes three mes.
Disarming for all areas:
User password + Disarm
Disarming for specified area:
User password + # + Area
No.(1,2.3.4.5.6.7.8.9.010.011.012....)
+ Disarm
-The keypad does not display area No. greater than 9.
-If the area No. is greater than 9, enter " 0XX"for the No.."0"indicates
tens digits, and "XX"indicates the actual area No.
-If the selected area is not related to the keypad, the back light of “0” will
flashes three mes.
Clear alarm User Password+Hold Disarm
Fire Hold "1/Fire Alarm" for 3 s The Buzzer will beep three mes for failure operaon.
PA Hold "2/Panic Alarm" for 3 s The Buzzer will beep three mes for failure operaon.
Medical Hold "3/Medical" for 3 s The Buzzer will beep three mes for failure operaon.
Duress (Duress Code)+disarm
You can set the duress code on the web client of the control panel. Refer to
the user manual of control panel for details.
For further informaon see the control panel AX PRO manual.
Output
User Password+Output+relay
No.(1,2.3.4.5.6.7.8.9.010.011.012....)+
＃
-If the relay No. is greater than 9, enter " 0XX" for the No.."0"indicates tens
digits, and "XX"indicates the actual relay No.
- A successful command execuon implement an operaon "Off" or "On".
Away arm
Stay arm
Disarm
4
Operaon
Keypad Status
Sleep Status
Working Status
Enrollment Status
Free Status
The keypad will enter the sleep status
while meeng the following condions:
No RF data transmission
No key operaon for more than 10 s
No keypad tampering alarm
No polling
No beeping
No LED indicaon
The keypad will enter the sleep status while
meeng the following condions:
RF data transmission
key operaon
keypad tampering alarm
polling
Beeping
LED indicaon
While the keypad is enrolled to a control
panel, it enters the enrollment status.
Only if the keypad is enrolled, the key
operaon and status indicaon take
effects.
There is no area related to the keypad.
The key and back light do not works.
6
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
*
Aer you add one keypad, you can add PIN code (Keypad Password) in the user menu. When you click in the input box, there will be
indicaon shows that 4 to 6 numbers allowed (for 4 numbers there will be 10,000 differs (no disallowed combinaons)). For further
informaon see the control panel AX PRO manual. This is the same for each user.
*