User Manual

Note: while the detector is disarmed, power off and power on will make the detector enter the walk test mode.
6
Set up with App
5
Formang
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
While the detector is disarmed, the detector will enter the walk test mode (within 3 minutes aer being enrolled).
Trigger the detector within the detecon range.
If the LED indicator turns blue, the installaon posion is properly. If the LED indicator is sll off, adjust the posion of the detector.
within 3 min
aer the enrollment
5
Hold the tamper switch for 8 s and power the device on at the same me. The red LED flashes 3 mes when the formang
operaon is completed.
Funcon
Zone Type
Stay Arm Bypass
Chime Slide to green to enable the chime.
Select the zone type of the detector.
Descripon
You can view the device status including temperature, signal intensity, baery level, lid, arming/disarming, etc.,on the device page.
Tap the buon to enter the sengs page.
Slide to green to bypass the zone from
stay arming.