User Manual

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
The detector will enter the walk test mode (3 minutes) aer being enrolled.
Trigger the detector within the detecon range.
If the LED indicator turns blue, the installaon posion is properly. If the LED indicator is sll off, adjust the posion of the detector.
3min
5
Formang
6
Set up with App
Hold the tamper switch for 8 s and power the device on at the same me. The red LED flashes 3 mes when the formang
operaon is completed.
5
Funcon
Zone Type
Stay Arm Bypass
Chime
Enable Silent Zone
Slide to green to enable the chime.
Slide to green to make the zone keep
silent while alarm is triggered.
Select the zone type of the detector.
Descripon
You can view the device status including temperature, signal intensity, baery level, lid, arming/disarming, etc.,on the device page.
Tap the buon to enter the sengs page.
Double Knock
Slide to green to make the zone alarm
with double knock.
Cross Zone
Slide to green to bypass the zone from
stay arming.
If the alarm triggered in both of the linked
zones within the set me, two alarm
messages will be reported.