User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
13.3 Playback
You can search and play back the videos stored on the recorder.
Steps
1. Go to Menu → Video Search .
2. Select Search Mode.
General
Normal videos.
Event
Moon detecon, alarm, moon│alarm, moon&alarm videos.
3. Select Camera, Video Type, Start Time, and End Time.
4. Click Search.
5. Select a video and click Play.
13.4 Backup
Back up the videos stored on the recorder.
Before You Start
Connect a USB storage device to your recorder.
Steps
1. Go to Menu → Video Search .
2. Select Search Mode.
General
Normal videos.
Event
Moon detecon, alarm, moon│alarm, moon&alarm videos.
3. Select Camera, Video Type, Start Time, and End Time.
4. Click Search.
5. Select the videos and click Export.
Note
The number of USB interface varies with recorder models. If your recorder contains only one
USB interface, you can back up videos via remote control or touchscreen.
Mobile Video Recorder User Manual
68