User Manual

13.2 Record and Capture
To record the videos of the connected cameras, or capture the license plate pictures if you enable
license plate recognion, you need to install a storage media and format it, and congure the
recording schedule, or congure the FTP server to upload the pictures.
13.2.1 Format Storage Media
A newly installed storage media must be formaed before it can be used.
Before You Start
Install the storage media.
Steps
1. Go to Menu → Storage .
2. Check the storage media to format.
3. Click Format.
Aer formang, the storage media status should be Normal.
13.2.2
Congure Recording Schedule
All-day recording is on by default. Device will start and stop recording according to the congured
recording schedule.
Before You Start
Install storage media and format it.
Steps
1. Go to Menu → Basic
Sengs → Record .
2. Select the camera to set recording schedule.
3. Click Set of Schedule.
4. Check Enable Schedule.
5. Select the day from the dropdown list for
sengs.
6. Congure all day schedule or custom schedule.
-
Check All Day to enable all-day recording, and then select the recording type from the drop-
down list.
-
Uncheck All Day, customize the
me period for recording, and select the recording type for
each
me period.
Note
Up to 8 me periods can be set for each day and each of the me periods cannot be
overlapped.
7. Click OK.
Mobile Video Recorder User Manual
67