User Manual

Cauon
You can check Connue to use this disk when self-evaluaon is failed. If you check it, the HDD
will be used connuously even when the S.M.A.R.T. detecon is abnormal. It is risky to enable
the funcon. Check it with care.
12.16.2 Detect Bad Sector
You can detect the bad sector of HDD to check the status.
Steps
1. Go to Conguraon → Storage → Storage Management → HDD Detecon .
2. Click Bad Sector
Detecon.
3. Select HDD No.
4. Select Test Type.
5. Click Start Detect.
The system starts to detect the HDD bad sector. You can view the HDD status on the interface.
6.
Oponal: Click Pause to pause the detecon. Click Restore to restore the detecon.
7. View the HDD informaon including HDD capacity, block capacity, status, and number of errors.
Result
Judge whether to use the HDD any more according to the
detecon result. If there are too many
bad sectors, change the HDD in
me.
12.17
Congure Analog Camera
For the device supporng analog camera connecon, you can congure the number of channels to
reduce the disconnected channel informaon display (such as "NO VIDEO").
Steps
Note
The funcon is only applicable to the device supporng analog cameras connecon.
1. Go to Conguraon → System → Camera Management → Analog Camera .
2. Select Channel Mode.
3. Click Save.
Mobile Video Recorder User Manual
64